Courses | Vector Academy

Automotive Ethernet

In this course you will receive a detailed introduction to basic Ethernet communication as well as an overview of the most important automotive Ethernet protocols. ...

Tags

Automotive Ethernet, Protocol Fundamentals

AUTOSAR Adaptive Platform

In part one you will learn all about the AUTOSAR Adaptive Platform (AP) methodology, the technical concepts as well as the operation of the basic software components. Theory a...

Tags

AUTOSAR, DaVinci

AUTOSAR Classic Platform

In module one of this training you will learn all about the AUTOSAR Classic Platform (CP) methodology, the technical concepts as well as the operation of the RTE and the basic...

Tags

AUTOSAR, DaVinci

CAN

In this course you will receive a detailed introduction to the CAN(FD) protocol basics. Besides the protocol basics, the physical layer, the communication principle as well as...

Tags

CAN, CAN FD, Protocol Fundamentals

CANalyzer for CAN

In this course you start with a detailed introduction to the CAN protocol. You will receive an introduction to CANalyzer and the opportunity to measure, record and analyze com...

Tags

Analysis, Diagnostics, CAPL, CAN, CAN FD

CANalyzer for CAN [compact]

In this course, you will receive a compact introduction to CANalyzer and the ability to independently measure, record and analyze communication on the CAN bus. In addition, yo...

Tags

Analysis, Diagnostics, CAN, CAN FD

CANape

This course will start with an overview of the measurement technics available in CANape. You will also receive an introduction to the basic features of the measurement protoco...

Tags

XCP, Offline Analysis, Data Mining, Calibration, Diagnostics

CANape [compact]

In this course you will receive a compact introduction to CANape and the ability to measure, record and analyze independently. In addition, you will learn how to automatically...

Tags

Offline Analysis, Data Mining, Calibration, XCP

CANdelaStudio

In this course you will learn how to perform diagnostic authoring starting at the level of an individual ECU. Specification of values, functions, fault memory, and diagnostic ...

Tags

Diagnostics, UDS

CANoe for CAN

In this course you start with a detailed introduction to the CAN protocol. You will receive an introduction to CANoe as well as the opportunity to measure, record and analyze ...

Tags

Analysis, Diagnostics, CAPL, Simulation, CAN, CAN FD

CANoe for CAN [compact]

In this course you will receive a compact introduction to CANoe as well as the opportunity to measure, record and analyze communication on the CAN bus yourself. You will also ...

Tags

Analysis, Diagnostics, CAPL, Simulation, CAN, CAN FD

CANoe for ISO11783

In this course you start with an introduction to the ISO11783 (ISOBUS) protocol. You will receive an introduction to CANoe for ISO11783 as well as the opportunity to measure a...

Tags

Analysis, CAPL, Simulation

CANoe/CANalyzer for CANopen

In this course you start with an introduction to the CANopen protocol. You will get an introduction to CANoe/CANalyzer for CANopen as well as the possibility to configure CANo...

Tags

Analysis, CAPL, Simulation, CANopen

CANoe/CANalyzer for Ethernet

In this course you start with a detailed introduction to basic Ethernet communication and an overview of the most important automotive Ethernet protocols. You will receive a g...

Tags

Analysis, Diagnostics, CAPL, Simulation, Automotive Ethernet

CANoe/CANalyzer for Ethernet [compact]

In this course, you start with a condensed introduction to basic Ethernet communication and an overview of the most important automotive Ethernet protocols. You will receive a...

Tags

Analysis, Diagnostics, CAPL, Simulation, Automotive Ethernet

CANoe/CANalyzer for FlexRay

In this course you start with a detailed introduction to the basics of the FlexRay protocol. You will receive a general introduction to CANoe/CANalyzer for FlexRay as well as ...

Tags

Analysis, CAPL, Simulation, FlexRay

CANoe/CANalyzer for J1939

In this course you start with a detailed introduction to the J1939 protocol basics and deal with the corresponding network description. You will receive an introduction to CAN...

Tags

Analysis, Diagnostics, CAPL, Simulation, J1939

CANoe/CANalyzer for LIN

In this course you start with a detailed introduction to the LIN protocol. You will receive an introduction to CANoe/CANalyzer for LIN as well as the possibility to measure an...

Tags

Analysis, CAPL, Simulation, Testing, LIN

CAPL for CANalyzer

In this course you will get an introduction to Vector's propritary programming language called CAPL. After commissioning CANalyzer for practical exercises on a CAN and CAN FD ...

Tags

CAPL, CAN, CAN FD

Certified Embedded Associate AUTOSAR Adaptive (CEA.A)

The certificate is based on the AUTOSAR Adaptive Platform course. The item offered here includes the exam that allows you to qualify as a "Certified Embedded Associate - Adapt...

Tags

AUTOSAR, DaVinci, Certification

Certified Embedded Associate AUTOSAR Classic (CEA.C)

The certificate is based on the AUTOSAR Classic Platform course. The item offered here includes the exam that allows you to qualify as a "Certified Embedded Associate - Classi...

Tags

AUTOSAR, DaVinci, Certification

Certified PREEvision Configurator

The qualification program Certified PREEvision Configurator builds up a deep knowledge about PREEvision’s configuration capabilities. The content of the education phase is giv...

Certified PREEvision Modeler Exam

The aim of this offer is the acquisition of the certificate "Certified PREEvision Modeler".
Contents and PREEvision usage will not be teached in this course, i.e. it is exclusi...

Tags

AUTOSAR, Certification

Communication Design with PREEvision (CAN + Ethernet)

This course starts with the basic mechanisms and operating concepts of PREEvision.
After an introduction to general communication concepts in AUTOSAR, you will gain an overview...

Tags

Automotive Ethernet, CAN, CAN FD

Communication for Charging Systems – Basic Charging and ISO15118 High-Level Communication (HLC)

The course gives a comprehensive overview of charging in general and more specific the communication between electric vehicle and charging station. The first part is based on ...

Tags

Charging Communication

Communication for Charging Systems – ISO15118 Advanced Features Plug and Charge

In this course you will get a deeper insight into the charging communication, specifically for Plug-and-Charge (PnC). For advanced features, such as PnC, many Cyber Security F...

Tags

Charging Communication

Diagnostic Test with CANoe.DiVa

In this course, you start with the diagnostic test options in CANoe.DiVa
and the associated requirements for the diagnostic data. You will receive an introduction to the evalua...

Tags

Diagnostics, Testing

Diagnostics UDS

In this course you will understand contemporary diagnostic concepts, based on concrete use cases considering the relevant automotive industry standards. The standards for bot...

Tags

Diagnostics, UDS

Diagnostics with Indigo

In this course you will start with the diagnostic possibilities of Indigo. You will receive a practical introduction to the use of diagnostics and remote diagnostics with Indi...

Tags

Diagnostics

Digital Communication in Vehicles

This remote course gives you an overview of the historical background of the technology change in vehicles and the essential aspects of bit-serial communication. This includes...

Tags

CAN, CAN FD, Automotive Ethernet, LIN, FlexRay

Digital Communication in Vehicles [compact]

This remote course offers you an overview of the historical background of the technology change in vehicles and the essential aspects of bit-serial communication. This include...

Tags

CAN, CAN FD, Automotive Ethernet, LIN, FlexRay

DYNA4 Fundamentals

This course enables you to use the DYNA4 simulation software efficiently. You will receive an introduction to the DYNA4 user interface to prepare and run simulations and analy...

Tags

ADAS, Simulation

DYNA4 Simulation Model - Background Engine

In this course you gain insight into the model approaches used for the relevant components of the vehicle engine model. You obtain an overview of the model parameters used in ...

Tags

Simulation

DYNA4 Simulation Model - Background of the Vehicle Model incl. ADAS-Sensors

In this course you gain insight into the model approaches used for the relevant components of the vehicle dynamics model, the sensors and control units for ADAS applications a...

Tags

ADAS

ECU Tests with CANoe

In this course you will learn how to write automatic tests for CANoe with CAPL. After an introduction to vehicle diagnostics, you will expand your tests with diagnostic comman...

Tags

Diagnostics, XCP, Testing, CAPL, VT System, Simulation

ECU Tests with the VT System and CANoe

The test possibilities of CANoe are completed with the VT System. All ECU interfaces, i.e. communication buses, power supply, electronic inputs and outputs are under the contr...

Tags

Testing, VT System, CAPL

ECU Tests with vTESTstudio and CANoe

In this course you will implement test projects with vTESTstudio and its integrated test design editors (test tables, test diagrams, CAPL test modules, ...). Project organizat...

Tags

Testing, CAPL

Flash Bootloader

In this course you will learn the basics about Flash Bootloaders and detailed information about Vector’s Flash Bootloader product. You will learn how a normal download procedu...

Tags

AUTOSAR

FlexRay

This course will introduce you to the FlexRay protocol basics. In addition to the protocol basics, the physical layer, the communication principle, the wake-up behavior and ne...

Tags

FlexRay, Protocol Fundamentals

LIN

In this course you will receive a detailed introduction to the LIN protocol basics. Besides the LIN protocol basics, the physical layer, the communication principle, error det...

Tags

LIN, Protocol Fundamentals

MICROSAR Cybersecurity

Modern vehicle architectures are opening towards the outside world and confidentiality, authenticity and integrity become requirements for in-vehicle-applications. In this cou...

Tags

AUTOSAR, Security

MICROSAR Ethernet Advanced Course

In this training you will gain a fundamental knowledge about Ethernet physical layers, TCP/IP and protocols that are commonly used in Automotive applications. You will learn a...

Tags

AUTOSAR, Automotive Ethernet

MICROSAR Ethernet Basic Course

In this course you will gain a fundamental knowledge about Ethernet physical layers, TCP/IP and protocols that are commonly used in Automotive applications. You will learn abo...

Tags

AUTOSAR, Automotive Ethernet

MICROSAR Memory

Nonvolatile Memory Management must support basic technologies like EEPROM or Flash. In this training you will learn about the optimal configuration, the behavior in normal ope...

Tags

AUTOSAR

MICROSAR Mercedes-Benz SLP11

With the introduction of AUTOSAR 4 Mercedes-Benz makes use of a set of features offered by the standard. This training covers these new features and how they are implemented i...

Tags

AUTOSAR

MICROSAR Multi-core

If you want to benefit from a speedup for the program execution you will have to use the sheer power of multiple processor cores intelligently. In this training you will get t...

Tags

AUTOSAR

MICROSAR Safety

This training will give an introduction to MICROSAR Safe - Vector's solution for ECUs with safety-related functions. MICROSAR Safe enables the freedom from interference for sa...

Tags

AUTOSAR, Functional Safety

ODX

In this course, you start with an introduction to the test parameterization format ODX. The data format and the possible use cases are explained in detail. ODXStudio is shown ...

Tags

ODX, Diagnostics

PREEvision Administration

This course teaches you the most important elements for administering a server-based PREEvision environment. You will learn the architecture of the PREEvision collaboration pl...

PREEvision AUTOSAR Adaptive Add-On

In this Add-On to the course „PREEvision SW Engineering (AUTOSAR Classic)“ you will learn the steps for modeling AUTOSAR Adaptive systems. Both hardware and software aspects a...

Tags

AUTOSAR

PREEvision Functional Safety

This course gives you an overview of the implementation of the individual phases of ISO26262 in PREEvision. Using a concrete example, you will work through the individual proc...

Tags

Functional Safety

PREEvision Hardware Development

This course imparts the basic mechanisms and concepts of PREEvision - both in terms of operation and data modeling. Based on your own requirements for a vehicle to be develope...

PREEvision SW Engineering (AUTOSAR Classic)

In this course you will learn about the basic mechanisms and operating concepts of PREEvision. After that you will learn how to design AUTOSAR Classic Software in PREEvision....

Tags

AUTOSAR

Requirement Engineering with PREEvision

In this course you will learn about the basic mechanisms and operating concepts of PREEvision. After that you will learn how to create and edit requirements and customer feat...

Security with CANoe.Ethernet and Security Manager

In this course you will start with an overview of commonly used security mechanisms and their usage in automotive security protocols. A more detailed introduction of the TLS, ...

Tags

Security, Automotive Ethernet

vCDM Fundamentals

Consequently, solid management of all calibration data is a precondition for quality and efficiency in the ECU calibration process. Specifications, software sets, description ...

Tags

Calibration

vCDMstudio for Experts

vCDMstudio is an efficient tool for editing parameter set files. The parameters created during ECU calibration can be conveniently displayed, compared and edited. With this tr...

Tags

Calibration

Vector Certified Embedded Professional

The qualification program Vector Certified Embedded Professional builds up a deep knowledge about MICROSAR, Vector's AUTOSAR Classic Basic Software. The content of the educati...

Tags

AUTOSAR

VectorCAST/C++ Unit Testing

This course enables you to independently generate test environments, test cases and text reports. The course provides basic theoretical knowledge about module tests and code c...

Tags

Testing

vFlash

In this course you will get a detailed introduction into the basics of ECU (re-)programming. You will get to know the different functionalities of vFlash in detail. Using diff...

Tags

Diagnostics

vSignalyzer

In this course you will get to know vSignalyzer as an efficient evaluation tool for measurement data. With functions from the integrated function library you will be able to h...

Tags

Offline Analysis, Data Mining

XCP

In this course you will receive a detailed introduction to the XCP protocol. All relevant details for the synchronous data transfer are explained. The models for calibration a...

Tags

XCP, Protocol Fundamentals