Training Courses
Here you find our course offer. You can use our filters to limit the displayed offer according to your wishes:
- Member means you need to subscribe to an annual membership of the Vector China Learning Platform to access the course. You can then sign up for member courses held by Vector China while you are a member.
- Paid means each individual course has a specific fee and needs to be purchased and paid individually.
Filter
Courses: of
ASPICE Training(Paid course)
This training introduces the worldwide used Automotive SPICE v3.1 standard which defines processes and best practices for software-based system development. It is derived from...
Tags
Paid, ASPICE
Automotive Cybersecurity ISO 21434 & Security Engineering(paid course)
In this course, you will understand the regulations and standards related to automotive cybersecurity. You will also be familiar with ISO 21434 cybersecurity management system...
Tags
Fee based, Automotive Cyber Secutity
Automotive Ethernet Advanced (Member)
In this course, you will receive a brief introduction to DoIP and brief introduction to SOME/IP .
Tags
Member, Protocol Fundamentals
Automotive Ethernet Basic (Member)
In this course, you will receive an Automotive Ethernet Introduction,Ethernet Physical Layer, Ethernet Frame and VLAN, Internet Protocol (IPv4/IPv6) and Transport Layer(TCP/UD...
Tags
Member, Protocol Fundamentals
Automotive Ethernet E-Learning course(free course)
Ethernet- and IP-based communication has already been used in the automotive industry for a number of years. This communication technology is now also increasingly being used ...
Tags
Free, ELN, Protocol Fundamentals
Automotive Security Testing (paid course)
In this course, you will understand the basic principles of automotive cybersecurity testing and related test environment setup and master Vector fuzz testing and penetration ...
Tags
Fee based, Automotive Cyber Secutity
AUTOSAR E-Learning course(free course)
AUTOSAR (Automotive Open System Architecture) is a standardization initiative of leading automotive OEMs and suppliers and was founded in autumn 2003. The goal is to develop a...
Tags
Free, ELN
CAN FD Protocol Introduction Video(free course)
The video course which covers the introduction of CAN FD protocol.
Tags
Free, Video, Protocol Fundamentals
CAN Protocol E-Learning course(free course)
CAN (Controller Area Network) is a serial communication technology used especially for reliable data exchange between electronic control units (ECUs) in the automobile.
This E-...
This E-...
Tags
Free, ELN, Protocol Fundamentals
CAN Protocol Introduction Video(free course)
The video course which covers the introduction of CAN protocol.
Tags
Free, Video, Protocol Fundamentals
CANalyzer.CAN Basic Training(Member)
The course introduces the basic content of CANalyzer.CAN,including the overview of CANalyzer,Basic configuration、Interavtive Generator、Measurement&Analysis and brief introduc...
Tags
Member
CANape Advance Training（Member）
In this course,you will learn CCP/XCP fundamentals, measurement and data logging, data analysis based on Function&Script&Panel and DataMining. You will also learn calibration ...
Tags
Member
CANape Basic Training(Member)
In this course, you will learn the basics of CANape, including project creation, signal measurement and logging, data analysis and report printing and calibration, and Flash.
...Tags
Member
CANape Basic Tutorials Video(free course)
The video course which covers the basic introduction of XCP and CANape operation introduction: CANape project creation, Measuremnt, Calibration, Offline analysis introduction....
Tags
Free, Video
CANdelaStudio E-Learning course (paid course)
The E-Learning course covers the content of classroom course. You can choose the time and place of learning flexibly , and adjust the learning progress at any time. The exerci...
Tags
Fee based, ELN
CANdelaStudio Tutorials Video(free course)
The video course which covers the CANdelaStudio basic operation,etc.
Tags
Free, Video
CANoe for LIN Disturbance and Stress CAPL Function(Member)
In this course, you will learn how to use CAPL functions to implement LIN error.
Tags
Member, ELN
CANoe Option Ethernet(Member)
In this course, you will receive an introduction to Ethernet hardware configuration (Network-Based)、Creation of CANoe.Ethernet project、Introduction to CANoe.Ethernet measurem...
Tags
Member
CANoe Option J1939(Member)
You will receive an introduction to CANoe for J1939 as well as the possibility to measure, record and analyze the communication on the CAN bus. In addition, you will learn how...
Tags
Member
CANoe Option LIN(Member)
You will receive an introduction to CANoe for LIN as well as the possibility to measure and analyze the communication on the LIN bus. You will also learn how LIN control devic...
Tags
Member
CANoe.CAN Basic Training(Member)
You will receive an introduction for CANoe to measure and analyze the CAN bus. You will also learn how to simulated with CANoe and the CAPL programming language. ...
Tags
Member
CANoe.DiVa&vFlash How to implement test of Bootloader(free course)
You will study that how to import vFlash project into CANoe.DiVa and test function of Bootloader.
Tags
Free, Video
CANoe.ETH Network-Based Tutorials Video(free course)
The video course which covers the basic concept of Ethernet network, software and hardware network configuration and introduction of Packtet Builder & IG module. ...
Tags
Free, Video
CANoe.LIN Basic Training(Member)
In this course, you will receive an introduction to CANoe for LIN as well as the possibility to measure and analyze the communication on the LIN bus. You will also learn how L...
Tags
Member
CANoe/CANalyzer Basic Tutorials Video(free course)
The video course which covers the basic operation introduction of CANoe/CANalyzer: CANoe configuration creation, Analysis Window, generation module, simulation function and CA...
Tags
Free, Video
CANoe/CANalyzer Option CAN/CAN FD E-Learning course with TrainingCar(paid course)
The E-Learning course covers the content of classroom course. You can choose the time and place of learning flexibly , and adjust the learning progress at any time. The exerci...
Tags
Fee based, ELN
CANoe/CANalyzer Option CAN/CAN FD E-Learning course(paid course)
The E-Learning course covers the content of classroom course. You can choose the time and place of learning flexibly , and adjust the learning progress at any time. The exerci...
Tags
Fee based, ELN
CANoe/CANalyzer Option CAN/CAN FD Measurement
You will receive an introduction to CANoe as well as the opportunity to measure, record and analyze communication on the CAN bus.
Tags
Member
CANoe/CANalyzer Option CAN/CAN FD Simulation(Member)
In this course, you will learn how ECUs are simulated with CANoe and the CAPL programming language. You will also learn system variables and how to create panels. ...
Tags
Member
CANoe/CANalyzer Option LIN E-Learning course with TrainingDemo(paid course)
CANoe is a comprehensive software tool for the development, testing and analysis of entire ECU networks and individual ECUs. This E-Learning is basic course, which introduce t...
Tags
Fee based, ELN
CANoe/CANalyzer Option LIN E-Learning course（paid course）
CANoe is a comprehensive software tool for the development, testing and analysis of entire ECU networks and individual ECUs. This E-Learning is basic course, which introduce t...
Tags
Fee based, ELN
CAPL Test for CANoe Basic Training(Member)
In this course, you will receive an introduction to test, Test Modules structure and creating Test Modules. You will also learn Test Case programming and Test Service Library-...
Tags
Member
Certified PREEvision Configurator (paid course)
The qualification program Certified PREEvision Configurator builds up a deep knowledge about PREEvision’s configuration capabilities. The content of the Education Phase is giv...
Tags
Fee based
CSM Basic Operation Training Videos(free course)
The video course which covers the basic operation introduction of CSM ADMM, THMM, ECAT based ADMM and CNT device.
Tags
Free, Video
Diagnostics Workshop(Member)
In this course, you will receive an introduction to Vehicle Diagnostics, CANdelaStudio, ODX and ODXStudio as well as CANoe.DiVa, Indigo, vFlash and DoIP. ...
Tags
Member
DoIP Workshop(Member)
In this course, you will will receive an introduction to background and DoIP protocol. You will also learn application and soulation of DoIP.
Tags
Member, Protocol Fundamentals
E-Learning CANoe/CANalyzer.CAN/LIN Replay Block(Member)
In this course, you will learn how to use Replay Block to reproduce measurement sequences which have already been recorded.
Tags
ELN, Member
E-Learning CAPL Test for CANoe toturial(Member)
Learn about the functions of CAPL Test for CANoe, including the CANoe Test Module Configuration, CAPL Test Module Structure,Test Case Programming and Test Service Library-Chec...
Tags
Member, ELN
E-Learning Ethernet Advanced Protocol Introduction(Member)
The E-Learning course introduce the content of Ethernet Advanced protocol, which have SOME/IP and DoIP. SOME/IP includes types of services, SOME/IP SD service discovery and S...
Tags
ELN, Member, Protocol Fundamentals
E-Learning Ethernet Basic Protocol Introduction(Member)
The E-Learning course introduces the content of Ethernet basic protocols,including Ethernet physical layer,data link layer(MAC and VLAN),Internet Protocol(IPv4/IPv6)and transp...
Tags
ELN, Member, Protocol Fundamentals
E-Learning VN8900 Interface Family(Member)
The VN8900 interface family is designed for high-performance applications in combination with CANoe/CANalyzer. In this course, you will learn the system description of VN8900 ...
Tags
Member, ELN
Flash tool-vFlash（free course）
You will study that vFlash cannot only be controlled via its graphical user interface but also with an Automation Interface. With this programming interface it can be integrat...
Tags
Free, Video
FlexRay E-Learning course(free course)
FlexRay is a serial communication technology that is used in particular for data communication in very safety-critical use areas in the automobile.
This E-Learning course is in...
This E-Learning course is in...
Tags
Free, ELN, Protocol Fundamentals
FlexRay Protocol Introduction Video(free course)
The video course which covers the introduction of FlexRay protocol，inculding Background,Physical Layer,Communication Cycle,Frame structure and Bus Access. ...
Tags
Free, Video, Protocol Fundamentals
J1939 E-Learning course(free course)
SAE J1939 is a communication protocol based on CAN (Controller Area Network) that is in widespread use in all types of commercial vehicles. The protocol standardizes communica...
Tags
Free, ELN, Protocol Fundamentals
J1939 Protocol Introduction Video(free course)
The video course which covers the introduction of J1939 protocol,including Overview,PGN&Signal,transmission protocol.
Tags
Free, Video, Protocol Fundamentals
LIN Protocol E-Learning course(free course)
LIN (Local Interconnect Network) is a serial communications technology that was developed for cost-sensitive use areas in the automobile.
This E-Learning course is intended for...
This E-Learning course is intended for...
Tags
Free, ELN, Protocol Fundamentals
LIN Protocol Introduction Video(free course)
The video course which covers the introduction of LIN protocol, including Overview,Physical Layer,Communication Principle& Frame,Schedule and Status Management &Network Manage...
Tags
Free, Video, Protocol Fundamentals
Measurement Technology and tutorials(free course)
The video course which covers the introduction of Vector Measurement techlogy, including measurement device, measurement and data processing software, application scenarios. ...
Tags
Free, Video
PC-lint Plus Basic Tutorials Video(free course)
This course is a video course, which involves how to use PC-lint Plus for static code analysis.
Tags
Free, Video
Squore Basic Tutorials Video(free course)
This course is a video course, which involves the introduction of Squore's basic functions: integrating CANoe to realize system test requirement coverage status monitoring, in...
Tags
Free, Video
TCP/UDP communication for CANoe(Member)
In this course, you will receive a brief introduction to transport Layer(TCP/UDP) 、Brief introduction to TCP demo、Brief introduction to UDP demo.
Tags
Member, Protocol Fundamentals
Test on Diagnostic for CANoe(Member)
In this course, you will receive an Introduction to Diagnostics、Brief introduction to Protocols、Working with Diagnostic Descriptions and Diagnostics with CAPL Test Cases. ...
Tags
Member
UDS Protocol Training(Member)
In this course, you will receive an introduction of Vehicle Diagnostics、Introduction of Diagnostic Protocol UDS and Vector Diagnostic Solution.
Tags
Member, Protocol Fundamentals
VectorCAST Advanced Tutorials Video(free course)
The video course which covers
the advanced operation of VectorCAST/C++: static library test, dynamic library test, object file test, model back-to-back test with CANoe. ...
the advanced operation of VectorCAST/C++: static library test, dynamic library test, object file test, model back-to-back test with CANoe. ...
Tags
Free, Video
VectorCAST Basic Tutorials Video(free course)
The video course which covers the basic operation introduction of VectorCAST/C++: unit test function demonstration, software integration test function demonstration, Jenkins p...
Tags
Free, Video
VectorCAST Complie Template Configuration Tutorials Video(free course)
This course is a video course, which involves the explanation of the compilation template configuration function of VectorCAST/C++: compilation template configuration in linux...
Tags
Free, Video
VectorCAST Function Explanation Tutorials Video（free course）
This video course, which involves the function explanation of VectorCAST/C++: whether the unit test becomes slow due to multiple firmware flashes, introduction to CSV documen...
Tags
Free, Video
VH6501&Scope Tutorials Video（free course）
The video course which covers the introduction of VH6501,the operation of Digital Stress & Analog Stress,the introduction of Scope and how to capture the waveforms by Scope. ...
Tags
Free, Video
vTESTstudio basic (Member)
In this course, you will receive an introduction to vTESTstudio overview、vTESTstudio basic configuration、Test Table、Test concepts、Test Implementation Methods and Re-use & Tra...
Tags
Member
vTESTstudio Basic Tutorials Video(free course)
The video course which covers the basic operation of vTESTstudio: vTESTstudio overview, Project creation, CANoe execution test case, Test table, Test Commands, Test Parameters...
Tags
Free, Video
VX1000 Basic Tutorials Video（free course）
The video course which covers the basic VX1000 operation introduction: how to connect VX1000 hardware to your PC, how to configure VX1000 hardware parameters, how to setup CAN...
Tags
Free, Video
XCP (Universal Measurement and Calibration Protocol) E-Learning course(Subscription needed)（Member）
The XCP protocol is used for measuring and calibrating ECUs (reading and writing data from the internal memory). XCP was designed to offer measurement data acquisition with mi...
Tags
Member, ELN, Protocol Fundamentals