VectorAcademy
We will help you find the TrainingCenter that is responsible for you. Please choose your country and the desired language.

International Website

Visit our international website for courses from this location:
To the international offer

Corresponding Training Facility:
Choose a language

CANoe/CANalyzer Ethernet [extended]

In this course you start with a detailed introduction to basic Ethernet communication and an overview of the most important automotive Ethernet protocols. You will receive a general introduction to CANoe/CANalyzer for Ethernet as well as the opportunity to measure, record and analyze communication on the Ethernet network yourself. You will also learn how ECUs are simulated with CANoe and the CAPL programming language. The creation of panels and the use of simple diagnostics complete the course.

Delivery Format: This Course is offered in Classroom Format

Duration: 28 hours

Target Group: Users of Ethernet and IP in motor vehicles

Prerequisites: Basic knowledge of serial communication principles

Goal: Knowledge about the ISO OSI layer model, Ethernet, IP, TCP and UDP as well as automotive application protocols DoIP, SOME/IP, TSN, AUTOSAR I-PDU in vehicles, introduction for initiation of an Ethernet network with CANoe/CANalyzer, measurement and analysis in the Ethernet context, CANoe/CANalyzer as a DoIP tester and CANoe as a simulation tool for Ethernet ECUs

Agenda:

1. Introduction

  • Motivation for the usage of Ethernet in vehicles
  • Protocols and their user areas

2. Physical Layers

  • OSI layer model
  • Physical network architectures and topologies
  • Automotive Ethernet: IEEE 100BASE-T1 and IEEE 1000BASE-T1
  • Traditional office Ethernet: IEEE 100BASE-TX and IEEE 1000BASE-T
  • Switched Networks (100/1000BASE-T1) vs. Ethernet Bus (10BASE-T1S)

3. Ethernet Fundamentals

  • Introduction into the Ethernet protocol
  • Addressing with MAC addresses and VLAN tag
  • Basic MAC frame and tagged MAC frame
  • Local Area Network (LAN) and Virtual Local Area Network (VLAN)
  • Switch as the coupling element

4. Internet Protocol (IP) Fundamentals

  • Introduction into IPv4 and IPv6
  • IP addresses and subnet masks
  • IP packet
  • Auxiliary protocols DHCP, ICMP, ARP, NDP and AutoIP

5. UDP and TCP Fundamentals

  • Overview UDP and TCP
  • Connection-oriented and connectionless communication
  • Addressing with ports
  • TCP segment and UDP packet
  • TCP and UDP Sockets

6. Introduction in Automotive Application Protocols

  • Motivation
  • Protocol overview and application areas

7. Ethernet-based Vehicle Diagnostics

  • Introduction into DoIP
  • Phases of the DoIP communication
  • DoIP packet and transmission of a diagnostic (UDS) service
  • CANoe as DoIP Tester
  • Overview SOVD – Service Oriented Vehicle Diagnostics

8. Overview Automotive Cyber Security

  • Main goals of Security
  • Security introduction with a TLS (Transport Layer Security) example
  • DoIP via “Secured Channel” with CANoe and Security Manager

9. Overview Functions for Ethernet in AUTOSAR

  • Traditional transmission of signals over Ethernet
  • AUTOSAR I-PDUs and container PDUs (Protocol Data Unit)
  • AUTOSAR I-PDUs and SOME/IP-SD

10. SOA and SOME/IP

  • Introduction service-oriented architectures (SOA)
  • Effects of SOA to vehicle architectures
  • Introduction SOME/IP and SOME/IP-SD
  • Types of services: Methods, Events, Fields
  • Typical use cases for SOME/IP and SOME/IP-SD
  • Introduction to CANoe Application Objects

11. Time Sensitive Networking (TSN)

  • Introduction in AVB/TSN protocol family
  • Used protocols in the automotive area
  • Time synchronization in vehicle
  • Available transport protocols
  • Stream reservation and traffic shaping

12. Introduction into CANoe/CANalyzer for Ethernet

  • Overview CANoe/CANalyzer for Ethernet
  • Available hardware for Ethernet and IP
  • License model

13. Initiation of an Ethernet Network

  • Creation of a CANoe/CANalyzer configuration for Ethernet
  • Configuration of the used hardware

14. Measurement and Analysis with CANoe/CANalyzer for Ethernet

  • Measurement and analysis windows for Ethernet and IP networks
  • Evaluation of application related protocol information
  • DoIP, SOME/IP, AVB/TSN, AUTOSAR I-PDU and AUTOSAR NM
  • Logging and offline analysis
  • Sending of Ethernet frames, IP packets and TCP/UDP packets

15. Diagnostics over IP (DoIP) with CANoe/CANalyzer for Ethernet

  • Analyzing the DoIP communication phases
  • CANoe/CANalyzer for Ethernet as a DoIP tester

16. Introduction into CANoe as a Development Tool

  • CANoe within the development process
  • Signal Server concept for signals and Service-Signals
  • Interaction Layer for AUTOSAR PDUs and SOME/IP
  • Working with Application Panels to manipulate Application Objects

17. Simulating with Interaction Layers

  • Creation of a CANoe configuration for Interaction Layers
  • Adding the needed libraries
  • Model Generation Wizard
  • System panel, node and network panels as well as signal generators
  • Creating panels with the Panel Designer
  • CAPL for signals and service signals
  • Controlling Interaction Layers with CAPL
  • CAPL for Ethernet

Dates

Currently we do not offer any fixed dates for this course.

In case you are interested in booking a course exclusively for your company please get back to us. In a customer individual course we agree on a date and can also apply some changes to the content based on your need.

Please contact us for further details:

个人信息出境和境外再提供的同意