
MICROSAR Ethernet
Delivery Format: This Course is offered in Classroom or Remote Format.
Duration: Classroom: 2 days
Remote: 14 hours.
Target Group: ECU Developers.
Prerequisites: Participation in the training “AUTOSAR Classic Platform Course” or good knowledge of AUTOSAR Classic Platform.
Goal: Obtain an overview of Ethernet usage in AUTOSAR-based ECUs and acquire practical skills for configuring the MICROSAR.ETH Stack.
Agenda:
1. Overview and Introduction
- Motivation for Ethernet in vehicles.
- Differences compared to traditional vehicle networks.
- Protocols and the evolution of Ethernet in AUTOSAR.
- Vector’s MICROSAR Ethernet Solution.
2. Basics of Ethernet and TCP/IP
- PHY: MDI/MII, commonly used PHY layers and ECU hardware setup.
- MAC/VLAN addressing at the data link layer and switches.
- IPv4/IPv6 network layer addressing and routers.
- ARP, NDP, ICMP.
- Transport protocols (UDP, TCP) and transport layer addressing.
- Dynamic Host Configuration Protocol (DHCP).
3. Ethernet in the AUTOSAR Software Architecture
- Socket-based communication using TCP/IP versus PDU- and signal-based communication in traditional vehicle networks.
- AUTOSAR approach (SOAD + PDU Container).
- AUTOSAR Software Architecture.
4. Overview of Automotive Protocols and Use Cases
- Requirements arising from modern E/E architectures and distributed system approaches.
- Overview of SOME/IP(-SD), DoIP, TSN, AVB, XCP and NM protocols.
5. Diagnostics over IP (DoIP)
- AUTOSAR software architecture with DoIP.
- The DoIP protocol.
- DoIP use cases: DoIP Node vs. DoIP Gateway.
- Illustration of configuration principles in SOAD, DoIP and PDUR.
6. SOME/IP and Service Discovery (SD)
- Service-oriented communication with SOME/IP, SD and SoAd.
- Control Flow (SD) and Data Flow (SOME/IP).
- Illustration of configuration principles in SoAd, Sd and LdCom.
7. UDP Network Management (UdpNm)
- Network Management.
- MICROSAR configuration elements and principles.
8. Universal Calibration Protocol (XCP)
- Integration into the ETH stack.
- Illustration of configuration principles in SOAD and XCP.
9. Time-Sensitive Networking (TSN) and Audio Video Bridging (AVB)
- Differences between TSN and AVB.
- Time Synchronization Cluster in AUTOSAR.
- TSYN and STBM.
- Time synchronization on CAN, FlexRay and Ethernet.
- Synchronization message sequences on CAN, FlexRay and Ethernet.
- Time stamping and time bases on CAN, FlexRay and Ethernet.
- Service Module STBM.
- Use Case: AVB.
10. Exercise: Diagnostics over IP (DoIP)
- Setup of an embedded software DoIP use case.
- DCM.
11. Exercise: SOME/IP – Service Discovery (SD)
- Setup of an embedded software SOME/IP-SD use case.
- Service Discovery.
- Events.
- Remote Procedure Calls using Methods.
- Setup of embedded software PDU multiplexing using SOAD.
- Container PDU.
- Triggered UDP Packets.
Dates
Start
Language
Locations
Format
Price