
CANoe/CANalyzer Ethernet [extended]
Delivery Format: This Course is offered in Classroom Format
Duration: 28 hours
Target Group: Users of Ethernet and IP in motor vehicles
Prerequisites: Basic knowledge of serial communication principles
Goal: Knowledge about the ISO OSI layer model, Ethernet, IP, TCP and UDP as well as automotive application protocols DoIP, SOME/IP, TSN, AUTOSAR I-PDU in vehicles, introduction for initiation of an Ethernet network with CANoe/CANalyzer, measurement and analysis in the Ethernet context, CANoe/CANalyzer as a DoIP tester and CANoe as a simulation tool for Ethernet ECUs
Agenda:
1. Introduction
- Motivation for the usage of Ethernet in vehicles
- Protocols and their user areas
2. Physical Layers
- OSI layer model
- Physical network architectures and topologies
- Automotive Ethernet: IEEE 100BASE-T1 and IEEE 1000BASE-T1
- Traditional office Ethernet: IEEE 100BASE-TX and IEEE 1000BASE-T
- Switched Networks (100/1000BASE-T1) vs. Ethernet Bus (10BASE-T1S)
3. Ethernet Fundamentals
- Introduction into the Ethernet protocol
- Addressing with MAC addresses and VLAN tag
- Basic MAC frame and tagged MAC frame
- Local Area Network (LAN) and Virtual Local Area Network (VLAN)
- Switch as the coupling element
4. Internet Protocol (IP) Fundamentals
- Introduction into IPv4 and IPv6
- IP addresses and subnet masks
- IP packet
- Auxiliary protocols DHCP, ICMP, ARP, NDP and AutoIP
5. UDP and TCP Fundamentals
- Overview UDP and TCP
- Connection-oriented and connectionless communication
- Addressing with ports
- TCP segment and UDP packet
- TCP and UDP Sockets
6. Introduction in Automotive Application Protocols
- Motivation
- Protocol overview and application areas
7. Ethernet-based Vehicle Diagnostics
- Introduction into DoIP
- Phases of the DoIP communication
- DoIP packet and transmission of a diagnostic (UDS) service
- CANoe as DoIP Tester
- Overview SOVD – Service Oriented Vehicle Diagnostics
8. Overview Automotive Cyber Security
- Main goals of Security
- Security introduction with a TLS (Transport Layer Security) example
- DoIP via “Secured Channel” with CANoe and Security Manager
9. Overview Functions for Ethernet in AUTOSAR
- Traditional transmission of signals over Ethernet
- AUTOSAR I-PDUs and container PDUs (Protocol Data Unit)
- AUTOSAR I-PDUs and SOME/IP-SD
10. SOA and SOME/IP
- Introduction service-oriented architectures (SOA)
- Effects of SOA to vehicle architectures
- Introduction SOME/IP and SOME/IP-SD
- Types of services: Methods, Events, Fields
- Typical use cases for SOME/IP and SOME/IP-SD
- Introduction to CANoe Application Objects
11. Time Sensitive Networking (TSN)
- Introduction in AVB/TSN protocol family
- Used protocols in the automotive area
- Time synchronization in vehicle
- Available transport protocols
- Stream reservation and traffic shaping
12. Introduction into CANoe/CANalyzer for Ethernet
- Overview CANoe/CANalyzer for Ethernet
- Available hardware for Ethernet and IP
- License model
13. Initiation of an Ethernet Network
- Creation of a CANoe/CANalyzer configuration for Ethernet
- Configuration of the used hardware
14. Measurement and Analysis with CANoe/CANalyzer for Ethernet
- Measurement and analysis windows for Ethernet and IP networks
- Evaluation of application related protocol information
- DoIP, SOME/IP, AVB/TSN, AUTOSAR I-PDU and AUTOSAR NM
- Logging and offline analysis
- Sending of Ethernet frames, IP packets and TCP/UDP packets
15. Diagnostics over IP (DoIP) with CANoe/CANalyzer for Ethernet
- Analyzing the DoIP communication phases
- CANoe/CANalyzer for Ethernet as a DoIP tester
16. Introduction into CANoe as a Development Tool
- CANoe within the development process
- Signal Server concept for signals and Service-Signals
- Interaction Layer for AUTOSAR PDUs and SOME/IP
- Working with Application Panels to manipulate Application Objects
17. Simulating with Interaction Layers
- Creation of a CANoe configuration for Interaction Layers
- Adding the needed libraries
- Model Generation Wizard
- System panel, node and network panels as well as signal generators
- Creating panels with the Panel Designer
- CAPL for signals and service signals
- Controlling Interaction Layers with CAPL
- CAPL for Ethernet
Dates
In case you are interested in booking a course exlusively for your company please get back to us. In a customer individual course we agree on a date and can also apply some changes to the content based on your need.
Please contact us for further details:
- Telephone: +81 3 4586-1800
- E-Mail: academy(at)jp.vector.com